How To Repair Pvc Fence

Download Article

Download Commodity

Vinyl fences are very resilient, and then they don't crave a lot of maintenance. If some part does break, your fence is likewise easy to accept apart and reassemble. The well-nigh hard task is finding an identical replacement piece. Once you have it, you can chop-chop connect it to the existing parts. Your repaired fence tin can then serve equally a feature of your abode for many years.

Things You Should Know

• If a panel breaks on your vinyl fence, simply remove the top rails and panel from the department you want to supercede, slide the new panels into place, and replace the runway.
• You can besides supplant the rail by cutting information technology to length, removing the damaged runway, and sliding the new rail into the holes on the argue post.
• If i of the posts gets damaged, unscrew the top rail, dig upward the damaged post, prepare the new postal service in place with physical, and reattach the runway and panels.

1. i

   Social club similar replacement panels. You tin search online to observe many different fence styles. If you can, contact the argue'southward manufacturer to get new panels identical to the quondam ones. Take a moving-picture show of your fence and send information technology to companies to ensure yous get the right panels.^[1]

   • Effort to get replacement parts that are the aforementioned size and expect as shut as possible to the rest of your fence.
   • Home comeback stores may also sell debate parts and repair kits.

2. 2

   Unscrew the top rail at the ends. The top track attaches to the closest posts. Look for a pair of screws at the ends, securing the rail to those posts. Turn the screws counterclockwise to remove them, then gear up them aside.^[2]

   • These screws may be underneath the caps on the posts. Gently lift them with a hammer and chisel if you lot can't remove them by hand.
   • Go along the screws in a safe spot, such as a airtight container, so they can exist reused later.

   Advertisement

3. 3

   Remove the screws from the damaged panels. Now that the rails is gratuitous, locate the screws on the panels. If your fence's panels have pickets, or vertical confined, behind them, the screws may be at the console'southward ends. Turn them counterclockwise to remove them.^[three]

   • Not all fences take pickets or screws. Your argue's panels may exist held in place with brackets, which you lot tin can slide the panels out of.

4. four

   Slide the panels out of the fence. Lift the top rail off of the console you need to replace. Then, pull the panel up to remove it. If you took off all of the screws before, the console should come off of the argue easily.^[4]

   • If the panel is next to a post, it may exist attached with side brackets. Carefully move the panel to the side and out of the brackets.

5. 5

   Bank check the alignment of the posts with a level. Earlier installing the new panels, brand sure the fence posts are level. Hold a level against the side of each connecting post. If a postal service is positioned correctly, the level will be appear apartment from top to bottom. Straighten the posts as needed.^[five]

   • If your posts are held in the footing with concrete, they almost likely will not need to be adapted.

6. 6

   Slide the new panels into the fence. Fit each panel over the bottom rails. Adjust the panels advisedly then each is level from height to bottom. Slide them into any nearby brackets, so place the top rails over them. Make sure each panel looks evenly spaced in the fence.^[six]

   • In most fences, the panels will fit correct next to each other without leaving a gap.

7. seven

   Screw the panels and top track in place. Wait for the screw holes in the pinnacle and lesser ends of each panel. Utilise these to fasten the panels to the stabilizing pickets, if your fence has them. Finish adjusting the height rail, then tighten the screws near the contend posts to secure information technology in place.^[7]

   • If the screw holes practise not line up, you tin fill the existing panel holes with spray cream, then drill new holes 1 in (2.5 cm) deep.

Advertising

1. one

   Remove the panels from the rails. If your contend'south panels fasten to pickets, remove the screws at the superlative and bottom of the panels offset. So, slide the panels out of the rails. Clear the track completely.^[8]

2. 2

   Unscrew the track from the posts. Each rail slides into holes on the posts. You volition find a pair of screws property the rails in position. Plough these counterclockwise and set them bated. And so, slide the rails off of the posts.^[9]

   • Shop the screws in a safe location and go along the old rail in case you need to measure them.

3. 3

   Mensurate the length of rails you need. You lot tin can practice this by running record measure out from 1 post to another. Remember that each rails needs to accept a little actress length in order to slide into the post holes. Add about 2 in (5.1 cm) onto the length.^[10]

   • If you take the old rail, yous tin can also measure it for utilise equally an estimate.

4. 4

   Wear safety goggles and other protective gear. Before sawing into the track, take the proper safety precautions. Shield your eyes from debris by wearing safe goggles. Cover your mouth by wearing a respirator.

   • Avoid wearing loose clothing or jewelry when operating a saw.

5. 5

   Cut the rail to length with a circular saw. Set the new rail on a workbench. Before cutting, mark where you need to make the cuts so you get the size of rails you need. And then, advisedly cut through the track.^[eleven]

   • For the best results, choose a saw blade labeled for vinyl cut. Fence companies and home comeback stores may sell these blades.

6. 6

   Slide the runway into the holes on the fence posts. Brand certain the brackets for the panels are on the top side. Push the rail into the post holes until the rail hangs in place. Every bit long as the rail is the right length, it should fit.^[12]

   • If the rail doesn't fit properly, check the length over again. You lot may need to cutting information technology a picayune shorter.

7. 7

   Screw the runway to the posts. Locate the spiral holes on either end of the rails. You will demand a pair of screws on each side. Twist them clockwise to lock the rails in identify. When y'all're done, you can begin installing the vinyl panels.^[thirteen]

   • The size of screws you need differ from rail to rail.
   • Screws are usually included with new track, but you tin try using the screws from the quondam track.

Advertisement

1. 1

   Unscrew the connecting rail. Each track slides into slots on the postal service and is held in place with screws. Plough the screws counterclockwise to remove them. Pull both the top and bottom track away from the mail.^[fourteen]

   • If you have trouble installing a post, removing the runway and fence panels completely can give you more space.

2. 2

   Dig out the damaged post. Remove the former post as well equally any fragments that may be in the ground. If your post was held in place with physical, you will need to dig up the physical to remove it.^[15]

   • To remove the physical, dig out the dirt effectually information technology. You tin can refill the hole later.

3. three

   Measure where the new post will be placed. To figure out where to place the new postal service, measure the altitude between 2 existing posts. The new post should be placed an equal distance from the last post. Mark the location with paint, tape, or another indicator.^[16]

   • The post needs to be fifty-fifty and directly or else the track and panels will not fit correctly.

4. 4

   Dig a hole 3 ft (0.91 m) deep in the footing. Dig out the spot y'all marked earlier. Make the hole about 8 in (20 cm) in diameter. You lot can utilize a tape measure to ensure the hole is the size y'all need.

5. 5

   Seal the pole in place with concrete. Yous volition need about 120 lb (54 kg) of premixed concrete for 1 post. Place the post in the hole. While someone holds the post in position, fill the the hole with concrete. Cascade the concrete until it is about 4 in (10 cm) below the footing's surface.^[17]

   • The other person should hold the postal service direct. If it doesn't await right, conform information technology chop-chop earlier the physical solidifies.

6. 6

   Reinstall the argue rails and panels. Fit the fence rail into the holes on the new post, then begin sliding the panels onto the rail. Screw the rails to the inside of the post. Then, attach the panels, screwing them in place if they besides employ screws.^[xviii]

Advertisement

Add together New Question

• Question

  How tin I repair a break in 1 of the panels on my fence?

  

  Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman Boston. With over fifteen years of experience, Ryaan specializes in domicile improvement and property maintenance past leveraging engineering science and craftsmanship. Ryaan holds his Construction Supervisor and Domicile Improvement Contractor Licenses. Dissimilar about handyman contractors, Best Handyman Boston is licensed and insured. Boston Magazine and LocalBest.com take named Best Handyman Boston the Best Handyman in Boston.

  

  Home Improvement Specialist

  Expert Reply

  You actually would want to try to remove whatever panel that is. Any repair that you would make to information technology would be temporary, and it would just break once more over fourth dimension. You could try gluing it, but really it should be replaced if possible.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Keep any extra panels you accept after installing your fence.

• At that place are many different vinyl argue styles, so finding the right parts tin can take some time and patience.

• Accept a picture of your fence so you tin can get the right replacement parts.

• To keep your vinyl contend in expert shape, you'll likely need to clean it approximately once or twice a year in add-on to making any needed repairs.

Advertisement

Things You'll Need

• Replacement panels
• Screwdriver

• Replacement rail
• Screwdriver
• Measuring record
• Rubber goggles
• Respirator
• Circular saw

• Replacement post
• Screwdriver
• Shovel
• Cement
• Water
• Mixing container
• Measuring tape

Most This Article

Thanks to all authors for creating a page that has been read 23,552 times.

Did this article help you?

Source: https://www.wikihow.com/Repair-a-Vinyl-Fence

Share this post